How Much Do You Know About Wear-resistant Alumina Ceramic Linings

What is Wear-resistant Alumina Ceramic Lining?The alumina ceramic wear-resistant coating is made from a special corundum material formed by Al2O3 in the main raw materials and a rare metallic oxide as a solution. This ceramic is then calcined with a high temperature (1700 degC).
There are many different types of wear-resistant alumina tiles, such as high-aluminum sheets, wear-resistant ceramics linings. alumina patches and alumina linings.

What are some of the benefits and features of ceramic alumina linings that resist wear?
Wear-resistant Alumina Ceramic Lining Features: First, its hardness is high. Rockwell hardness can reach HRA80 to 90. Second, its wear resistance, which is higher than that of manganese and high-chromium cast-iron, can extend the life of equipment by more than tenfold. Third, it is light and its density of 3.65g/cm can reduce the weight of the equipment. Fourth, the wear resistant alumina lining adheres firmly and is heat-resistant. It is a good performer, and can be used for a very long time in temperatures up to 350 degrees Celsius without aging.
Wear-resistant Alumina Ceramic Lining: It is an inorganic, non-metallic, material that will not pollute the atmosphere. It has a high level of toughness, seismic performance, and fracture toughness. Wear-resistant ceramic lining has a high mechanical strength, good compatibility and integrity. It can effectively stop breakage and peeling due to impact force.

How can I identify wear-resistant alumina linings?
Look at the surface of ceramic sheet first. The surface is uniformly colored, smooth, and free of black spots. After vulcanization the ceramic wear-resistant lining is attached to background paper. The joints will be continuously shaped into a straightline. They can be identified through measuring their density. Density can be measured to calculate the alumina. The test can be performed using a 50mm distance, a sandblaster at a pressure 4.0 kg/cm3, and a 45° spray angle. Gradient, time-measured wear within 60 minute.

Can wear-resistant ceramic alumina linings be applied in these industries?
Wear-resistant alumina linings are used in power, metallurgy (including coal), petroleum, chemical, machinery, and other industries. The material should be safe and reliable to use for high-temperature corrosion, high-temperature wear or high-temperature ablation. The data shows that the wear-resistant materials have a ten-to-twenty-fold higher life span than cast stone or steel alloys cast in alloy, rubber and steel.
Tech Co., Ltd. is a leading silver nanoparticles producer with over 12 year experience in the chemical product development and research. Contact us if you need high quality Aluminium oxide. Send a request .

Inquiry us

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in concentrated hydrochloric acids.Particle size: 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Po…

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

Tungsten-nickel-copper/iron alloy is characterized by low thermal expansion, high density, radiation absorption and high thermal and electrical conductivity. It is widely utilized in the aerospace and medical industries. About High Density Tungsten…

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Molybdenum powder is made of a combination of molybdenum with boron. The chemical formula for molybdenum is MoB2, and the molecular weight is 202.69. Purity: >99%Particle size : 5-10 um Molybdenum Boride MoB2 Pulp : Molybdenum-boride, is a molybden…

0086-0379-64280201 skype whatsapp