Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for titanium carbide powder.
We use steel to build houses, parks, and playgrounds. If steel no longer exists, or if we have to build cities on Mars, what materials can replace steel?
Glass Fiber Reinforced Plastics (FRP)
It was first heard in 1940. Fiberglass has no steel in it, but it is very hard: An 8mm thick glass plate cannot be penetrated by a speeding bullet.
To make fiberglass, glass is first melted and drawn into wires. Glass fiber is very elastic and can be spun into cloth. Fiberglass or glass-reinforced plastics are made by pressing layers of glass cloth together and adding heat treatment to a hot-melt plastic.
The mechanical strength of fiberglass is comparable to that of steel, but it weighs only a quarter of that of steel, so it's very light. Moreover, fiberglass does not rust, and does not conduct electricity.
Glass fiber reinforced plastics (FRP) is a new technological material, which is light, beautiful, and strong, and can be used to make car bodies, motorboat hulls, railway carriages, construction materials, etc. The body of a car made of fiberglass weighs just over 150 kilograms. Fiberglass powerboats don't rust and rot, and they can be made into one piece without splicing. If the body of the boat breaks somewhere, just put some adhesive resin around it and put pieces of glass cloth on it.
The use of FRP is more and more extensive. In the military, FRP is used to make light tanks and gunboats, and in sports, FRP is used to make pole vaulting poles and bows for archery. In life, FRP is also used to manufacture furniture and kitchen bath equipment, such as bathtubs, sinks, which are beautiful, light, strong, and durable.
Iron and steel materials have many advantages, but it also has many defects, such as not corrosion resistance, not high-temperature resistance, not being hard enough, and heat insulation. Ceramics make up for these defects.
We all know that ceramics are fragile. After analyzing the composition of ordinary ceramics, scientists believe that one of its main materials, clay containing more impurities, is the source of ordinary ceramics' easy cracking. So, a silver-gray silicon nitride ceramic was made by mixing sand, starch, and zirconia in a nitrogen-filled furnace at 1,400 °C for seven hours.
This colorful high-tech ceramic, with almost the same specific weight as aluminum, can withstand high temperatures of more than 1500℃, and has very good toughness, and amazing hardness, only diamond can cut it. Since then, silicon carbide, zirconia, titanium carbide, toughened alumina, and other new ceramic materials have come out.
Different high-tech ceramics with different compositions have their own use.
Zirconia ceramics, for example, are particularly resistant to wear, corrosion, and high temperatures. Engine cylinders made of zirconia do not need a cooling system so that the heat generated by fuel combustion in the cylinder can be converted into the power required by the car to the maximum. In addition, the new cylinder is hard, not easy to wear, and the acid gas is formed by the decomposition of fuel oil corrosion. Therefore, this high-tech ceramic automobile engine has a long service life, high power, low manufacturing cost, and can save a lot of metal materials and 30% of the fuel consumption.
More interesting is that the cutting tool is made of high-tech zirconium-containing ceramics, once the knife body is impacted by external forces and cracks, it will automatically expand, and the cracks will be closed. Zirconia ceramic scissors, the blade is not blunt, rust not crack, known as never scrap "long life scissors".
The development of high and new technology can make ceramic become harder than iron and steel, and also can make it as ductile and plastic as copper, aluminum, and other non-ferrous metals. Titanium oxide ceramics, for example, are ground into extremely fine grains and, with a binder, melted into sheets at high temperatures. Simply heat the sheet to 1809°C and crush it. The result is a wavy ceramic plate. Another calcium fluoride ceramic, even when heated to 80℃, takes on the characteristics of extrusion deformation.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality chemical materials, please feel free to contact us and send an inquiry. ([email protected])
Although hydrogen fuel is a promising alternative to fossil fuels, the catalyst it relies on for power generation is mainly composed of rare and expensive metal platinum, which limits the wide commercialization of hydrogen fuel.…
According to the different molecular structure, it can be divided into four generations of polycarboxylate series superplasticizer, the first generation is acrylic acid copolymer, the second generation is propylene ether type, the third generation is…
How serious are fertility problems today? People don't want to give birth,can't afford it, and can't give birth that has become the "three mountains". The problem of childbirth is related to the people's livelihood. Whether a country can prosper or n…