Products

  • 0
  • 0

Global 3D printing metal powder market trend 2025-2028 Scientists Use 3D Printing to Print Non-magnetic Metal Powders into Magnetic Alloys by Newsseguesec

Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for 3D printing metal powder.

Scientists at Skoltech University in Russia used a 3D printer to create an alloy of two materials whose composition ratios varied from one region of the sample to the next, and the resulting alloy had gradient magnetism, even though none of the initial materials were magnetic.
 
3D printing, a rapid prototyping method, is maturing for aircraft parts, medical implants and prosthetics, jewelry, custom shoes, and more. 
 
The main advantage of 3D printing is the ability to create objects with very complex shapes that are either too expensive to produce or completely impossible to produce using traditional casting, rolling, stamping, or machining methods. 3D printing speeds up prototyping time and offers greater flexibility in product personalization and the number of batches. Another significant advantage of 3D printing is its low waste. 
 
However, 3D printing has its limitations, requiring objects to be made entirely of homogeneous materials or mixtures. If the composition is different in different parts of the product, it is possible to obtain samples with changing characteristics. For example, A bar made of an alloy of two metals has A variable ratio of composition: one end starts with 100 percent of metal A, then 50 percent of each, then 100 percent of metal B, and so on. Thus, the properties of the obtained materials (including magnetic materials) can vary in a gradient, which makes them potentially useful for the manufacture of motor rotors, magnetic encoder strips, transformers, etc.
 
Skoltech scientists have researched and made such a kind of material, with the original ingredients A and B being two alloys: aluminum-bronze (copper, aluminum, and iron) and austenitic stainless steel (iron, chromium, and nickel, among others). Both alloys are paramagnetic, which means they are not attracted by magnets. But if you mix them, you get what's called a "soft magnetic material" ferromagnet, which is attracted to a permanent magnet. 
 
The researchers used the two paramagnetic materials to create a gradient alloy. They used an InssTekMX-1000 3D printer, which works by depositing material using directional energy action, feeding a powdery material, and melting it with a laser at the same time. The resulting materials exhibit varying degrees of ferromagnetic properties, depending on the proportions of the components. 
 
The researchers also theorized that the atomic structure of the alloy contributes to the expression of ferromagnetism in the alloy: although both materials have so-called face-centered cubic crystal structures, the combination results in a magnetic body-centered cubic structure. 
 
Gradient soft magnetic alloys can be used in mechanical engineering, for example, in the production of electric motors. The results also show that the method of surface treatment of materials using directional energy action can not only obtain gradient materials using 3D printing but also discover new alloys. The technology is efficient and suitable for the rapid production of large parts.
 
3D Printing powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest 3D printing powder price, you can send us your inquiry for a quote. ([email protected])
 
3D Printing powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality 3D printing powder, please feel free to contact us and send an inquiry. ([email protected])

 

The EU’s draft REPowerEU plan calls for an increase of 15TWh of rooftop PV capacity by 2022. The draft also calls for EU and national governments to take action this year to reduce the time required to obtain permits for rooftop PV installations to three months, and proposes that "all new buildings and existing buildings with an energy grade OF D or above should have rooftop PV installations by 2025".  

In addition, the European Commission is likely to set a target for installed PV capacity of 300GW by 2025 and 500GW by 2030. Some members are more aggressive, with Austria, Belgium, Lithuania, Luxembourg, and Spain demanding a 1TW target for 2030.  

The REPowerEU initiative, worth 195 billion euros, was proposed by the EU on March 8 to phase out member states' dependence on Russian fossil fuels by 2030. In a few days, the European Commission will present a package to implement the RePowerEU strategy.  

As an important application scenario of distributed PV, rooftop PV is not limited to land, and the development conditions are relatively convenient.  

Since the end of 2021, Spain, France, the Netherlands, and other countries have introduced policies and measures such as government subsidies, tax cuts, fee reductions, and accelerated grid-connection approval to encourage the development of distributed PV.  Europe's potential for rooftop PV is huge and will continue to be an important growth pole for the industry, according to Wood Mackenzie.

Luoyang Tongrun Nano Technology is a trusted chemical supplier and manufacturer providing high-quality chemicals and Nanomaterials. If you are looking for the 3D printing metal powder, please feel free to contact us and send an inquiry.

Inquery us

Our Latest Products

Global early strength agent,superplasticizer for concrete market trend 2023-2027 Difference analysis between early strength agent and superplasticizer for concrete by Newsseguesec

Early strength admixture refers to the admixture that can improve the early strength of concrete and has no significant effect on the later strength.Superplasticizer for concreter is a concrete admixture that can reduce the amount of mixing water whi…

Global powdered instant sodium silicate market trend 2024-2026 Powdered Instant Sodium Silicate CAS 1344-09-8 Sodium Silicate Powder by Newsseguesec

Russian President says if the European Union imposes an oil embargo, Europe will buy energy at the most expensive price and economic activity in Europe will weaken. Rosneft needs to change its business model. Russia will help facilitate settlement an…

Global Powdered Instant Potassium Silicate market trend 2024-2030 Powdered Instant Potassium Silicate CAS 1312-76-1 Potassium Silicate Powder,99% by Newsseguesec

Brazil, the world's largest coffee bean producer, recently announced that it is facing the worst drought in 91 years, affecting local hydropower generation and agricultural Powdered Instant Potassium Silicate keeps going up. About Powdere…