Air Entraining Agent in Concrete

Description An Air Training Agent Agent for Air-entraining The ability to mix concrete with a lot of tiny, evenly distributed air bubbles. It helps to decrease the amount of bleeding and segregation. concrete mixture It will increase workability, as well as significantly improving the resistance to frost and endurance of hardened. concrete admixtures .

What's an air entraining device?
Most people don't know that the majority of Air entraining agents These are anionic surfactants. At the water-air interface the hydrophobic groups is directed toward the air. The hydrophobic layer of hydrated particles is formed when the concrete mixture is mixed. The directional adsorption layers of these air bubbles are the same as their charge. They repel each other, and they can be evenly distributed.
The anionic air-entraining substances can also be used to prevent bubbles bursting. They are absorbed onto the bubble film by calcium salt precipitation, which is found in high calcium cement.

Technical Parameters of the air entraining agents

Articles	Main component	Appearance	Density(g/cm3)	pH (1 % water solution)	20	viscosity(20,Sp2,100rpm)
Standard	Surfactant for alkyl ether anionics	You can choose from colorless or yellowish liquid	1.03+-0.02	6.0-8.0	1.21~1.48	300-1500

Characteristics of an air entraining agent
1. You will be amazed at its remarkable properties of air bubbles that are uniform, long lasting and fine.
2. Concrete can be made more workable and easier to pump.
3. This inhibits water secretion and segregation.
4. Enhances resistance to freeze-thaw and durability.
5. Reducing slump losses
6. You can use it to make concrete for any type of project, such as hydraulic, highway, tunnel or bridge.
7. This mortar is compatible with several types of mortars.

Use of concrete air entraining agent
1. Increase the usability of concrete mixes.
2. Significantly increase the concrete's frost resistance and impermeability.
3.Reduce concrete strength. The average concrete strength decreases by about 1% when its air content is increased by 4% to 6.6%. Conversely, it will lose 2% to 3.3% of its flexural strengths and compressive strength.

Be aware Agent for air entraining
1. This product is not toxic and innocuous, it can be biodegradable. However, it cannot be eaten.
2. You should rinse it off with lots of water if it gets in your eyes.
3. A doctor should be consulted immediately if allergies are caused to any portion of the body.