Tungsten boride, also known as black powder, has the following physical properties: molecular Formula WB2, metal conductivity. Purity>99%
Particle size range: 10-20um

About Tungsten Boride WB2:
Tungsten-boride consists of tungsten (tungsten) and boron. They are characterized by their high hardness. Vickers hardness is 20GPa of WB or diboride tungsten WB2 and 30GPa of WB4 for loads greater than 3N.
Tungsten boride density is 10.77 and tungsten boride melting point is about 2900degC. It is not a degrader of water, but can degrade aqua regina.
It is made by heating boron-tungsten powders to high temperatures.
Tungsten-boride possesses comprehensive properties including high melting points, high hardness, and chemical stability. It is a superhard, high melting-point material. This material is important for the military as it's bulletproof.
The rich phase diagrams of tungsten-alloys and the structure of the different phases have been changing for more than fifty years.
The highest boride (WB4) has a three-dimensional grid of boron molecules. We combine the thermodynamics stability with the principal calculation and then study the thermodynamics stability and mechanical properties.
The highest boron to identify tungsten must be WB3, composed of plane boron molecules in two dimensions, and not WB4, which is composed of grids of boron atoms in three dimensions. It was discovered that the borate tungsten system's shear modulus transformed the energy of its formation. It was found that mechanical properties were closely related to thermodynamic stability.
A high temperature and pressure sintering process is used to achieve the dense tungsten diboride. This is due to WB2's free diffusion coefficient. This reduces the amount of tungsten diboride and increases its cost.
The boron content in tungsten and the boron powder is not easily measurable, so it's difficult to produce WB2 bulk materials from these powders.
It can also cause hypoborate to form during the sintering phase, and it is impossible to obtain compact bulk materials that have WB2 as their main phase.

Please send us an email to receive the most recent tungsten boride price if you are interested in buying Tungsten Boride tungsten boride bulk.

How is Tungsten Boride WB2 produced?
1. After mixing and grinding the raw materials tungsten and boran, heat them and react above 1400°C to get tungsten boreide. Continue the reaction to get W2B and finally cool and crush it to obtain the finished product.
2. Tungsten is combined with stoichiometric powder boron at a molar ration of W:B=2 to 1, and sintered under vacuum or in an argon atmosphere between 1200degC and 1300degC, to obtain two tungsten bore.
3. Use the solid-phase method. Tungsten boride can be prepared by combining metal tungsten with boron. The reaction formula can be found below. The stoichiometric metal powder tungsten is mixed with elemental boron, then ground and molded. It is heated, then reacted, at temperatures above 1400degC, to produce tungsten Boride. Continue the reaction, resulting in W2B. The product is obtained by cooling and crushing the W2B.

Tungsten boride WB2 powder Feature

Tungsten boride powder Molecular formula: WB2

Tungsten boride powder CAS NO:12007-09-9

Tungsten boride powder density:10.77g/cm3

Tungsten boride powder melting point:2900

Tungsten Boride powder Solubility & Stability

It does not dissolve in water. 100 can be decomposed by chlorine gas.

Tungsten boride powder Purity: >99%

Tungsten boride powder Particle size: 10-20um

Applications Tungsten Boride
Wear-resistant layer for wear parts.
WB compounds exhibit high melting points, high conductivity and wear resistance. They are also resistant to corrosion, high temperature, and high temperature. The compounds are also used for structural materials, wear resistant materials, and electrodes. Materials and many other fields. Tungsten boride can be produced through the reaction between metal tungsten (metal tungsten) and element boron (element boron) heated in an electric oven. It has all the properties of the W-B series compounds, and it has a wide range of applications in the future.
1) Prepare a piece of work with a coating rich in tungsten and boron, consisting of a substrate for the workpiece, followed by a layer of tungsten, a layer of tungsten-boride gradient, and finally a coating of tungsten-boride. In the direction that the tungsten-boride gradient increases, the boron concentration gradually increases.
2) To produce a bulk tungsten-diboride material, a high-temperature sintering process is used in a protective environment to densify tungsten-diboride powder synthesized at room temperature using high-purity W (tungsten) and B (boron) powders as raw materials. This method is able to obtain a compact tungsten-diboride material by sintering at normal temperatures and pressures. The prepared tungsten Diboride Bulk Material has several excellent properties including good stability, hardness and neutron absorption. It can be used for a variety applications, including cutting tools, new shielding materials, and corrosion-resistant material.

Tungsten Boride Powder:
As the damp reunion can affect the WB2 dispersion performance, and its use effects, it's important that you store your tungsten Boride WB2 in a dry and cool room. You should not expose this powder to air. WB2 powder must also not be exposed to stress.

Packaging & Shipping tungsten boride powder WB2:
The quantity of WB2 powder and the type of packing we use will determine which one is best for you.
Tungsten boride powder WB2 packing: Vacuum packaging, 100g,500g or 1kg/bag; 25kg/barrel. Or as per your request.
Tungsten boride powder WB2 shipping: Could be shipped by sea, air, or by express as soon after payment receipt.



Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years' experience in the production of high-quality nanomaterials. These include boride powders, graphite or nitride particles, as well as sulfide or sulfide particles, for 3D printing.
You can contact us to send an inquiry if you are interested in high quality tungsten-boride powder. (brad@ihpa.net)

Tungsten Diboride Properties
Alternative Names	tungsten boride, WB2 powder, tungsten boride WB2
CAS Number	12007-09-9
Compound Formula	WB2
Molecular Mass	205.5
Appearance	Gray Black Powder
Melting Point	2365 degC
Boiling Point	N/A
Density	N/A
Solubility In H2O	N/A
Vickers Hardness	20 GPa
Exact Mass	205.969544 g/mol
Tungsten Diboride Health & Safety Information
Sign Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Declarations	N/A
Transport Information	N/A

Inquiry us