High Purity Tungsten Disulfide WS2 Powder CAS 12138-09-9, 99.9%
Tungsten dioxide is its name. Formula: 247.97 Molecularweights W2. Additionally, hexagonal packaging is 99.9% pure
About
Tungsten Disulfide WS2:
Tungsten disulfide
It is possible to find either tungsten, sulfur, or both within this product.
Tungsten disulfide chemical formula
It is
WS2
. It's part of Transition Metal Dihalides. Also known as Trend-Metal Dihalides, this material can also be called: This material is part of certain catalysts used for hydrodesulfurization and hydrodenitrogenation.
WS2 tungsten disulfide
A similar structure can be found on the MoS2-derived models. Watoms house the MoS2 Coordinatsphere. The three-dimensional prism houses them all. The prism was heated to create organic Nanotubes in 1992. Many WS2Crystals come in dark colours. Some have hexagonal patterns. Another advantage of WS2Crystals are their layers visibility. You can use MoS2 as a lubricant in place of WS2Crystal. Many people believed oxygen ambient wouldn’t affect WS2. Studies on single-layer, environment-dependent WS2 oxidation have revealed that the contrary is true. By using photooxidation, W2 can be quickly converted to pure tungstenoxide. It can happen in both the ambient and indoor environment. This happens when the sun absorbs it. With WS2, this photooxided material is reduced to 1.88eV (560nm). Without oxygen and water, it is not possible. You get sulfuric and/or tungsten acids. Similar results can be seen with semiconductor transitional metalic dihalides, e.g. For testing dihalides, Ambient as well as MoS2 was used. Hydrofluoric Acid can be used with WS2, which is a combination of WS2 (nitric acid) and Hydrofluoric Acid. In oxygen rich areas, WS2 may turn to tungsten dioxide if heated. But WS2 cannot melt once it is heated. It will become tungsten dioxide. The melting temperature of WS2 at 1250oC is 1250oC. Chemical exfoliation can remove monolayers. You can create Li compounds with ultrasonics by placing lithium in Hexane. Many methods can be used to get rid of WS2, including chlorosulfonic and halide. We have the most up-to-date information. Send an inquiry
Tungsten disulfide
Prices
Get tungsten d if you wish to
Isulfide powder
Bulk purchases are possible.
Tungsten Disulfide details:
Tungsten Dioxide particle sizes: FSSS=0.4 to 0.7 mm; FSSS=0.85-1.15 mm. 80nm
Tungsten Disulfide purity: 99.9%
W
|
S
|
Al
|
As
|
Cl
|
Cu
|
Fe
|
Ni
|
P
|
Si
|
O
|
74.12
|
25.82
|
0.001
|
0.002
|
0.03
|
0.002
|
0.005
|
0.002
|
0.002
|
0.003
|
0.002
|
It's simple.
Tungsten Disulfide WS2 produced?
1. Roasting decomposition method:
The mixture should be stirred once every 3 hours. At temperatures of 57-60C, the mixture must be left to stand at room temperature for 3 hours. Mixture must be kept at room temperature for 16 hour. The reaction of ammonium with hydrogen sulfuride gases creates it. Ammonium Tetrathiotungstate results. Ammonium Tetrathiotungstate is heatable to make tungstenoxide.
H2WO4+2NH3*H2O-(NH4)2WO4+2H2O
(NH4)2WO4+4H2S-(NH4)2WS4+4H2O
2(NH4)2WS4+3O2-2WS2+4NH3+2S+2SO2+H2O
2. Tungsten can also be called liquid sulfur. By changing the color from red to green hot, you can create WS2. To make WS2, you could combine some tungsten and other sulfur. Reacting at 600pa to 606pa can create orthorhombic compounds.
3. By heating the ammonium-tetrathiotungstate and decomposing it, under the condition that the air is isolated, the temperature increases from room to 700 to 1200. In order to prevent the temperature from dropping, you must keep it at the same temperature for 24hrs. The temperature can go up to 30 to110 degrees Celsius every hour. The temperature can reach 30 to 110° Celsius an hour when the room is heated for 24 hours.
Ultrafine forms of tungstenoxide are available as well as thin varieties. It is totally safe for the surrounding environment.
Applicaciones
Tungsten Disulfide WS2:
Tungsten disulfide
It's possible.
tungsten disulfide lubricant, tungsten disulfide grease.
Tungsten dioxide2W2 friction coefficient 0.03 This renders it more powerful than graphite(PTFE), graphite[MoS2],graphite[MoS2],graphite[MoS2],graphite[MoS2],graphite [MoS2], and graphite[MoS2], as well graphite[MoS2], graphite[MoS2], and graphite[MoS2], which makes it even better than graphite(MoS2],MoS2], MoS2],MoS2],MoS2], but not,MoS2], however,MoS2], or graphite[MoS2],MoS2], moS2],MoS2],MoS2],MoS2],MoS2],MoS2],MoS2],M2],MoS2],MoS2],MoS2],MoS2,MoS2 It is extremely lubricious. You can use it to create electronic equipment like sensors and transistors. Use this powder in combination with alcohol.
The WS2 is used for extruding plastics and mold making.
Lubricating oils does not require hydraulic oil. It can be combined with oil made from grease and synthetic oils. It can be mixed with oils made of grease and synthetic oils to protect your surface. This oil can be used to protect surfaces from oils and grease. These oils are more resistant to heat than most oils, and also have a stronger structure.
Tolerances are possible for parts with a diameter less than one millimeter.
This can be used to maintain and cook medical equipment.
The base materials may be replaced with WS2 by ambient heat. It doesn't make the base material unreliable or unstable.
Durability will be increased by using W2 with PVD.
Tungsten Disulfide Powder Storage Conditions:
It is important to avoid tungsten dioxide being in direct contact with the environment. If it gets wet Disperssion W2Pulp may disperse. Handling WS2pulp should be taken very seriously
Packing and Shipping Tungsten Disulfide WS2 Pulver:
You can buy Tungsten dioxideW2 at different prices depending on your order.
Tungsten Disulfide Powder Packaging: vacuum packing 100g to500g at 1kg/bag @ 25,5kg/barrel. Other options are available.
Tungsten diulfide Powder Shipping: After payment receipt received, can ship via sea or air.
Nanotechnology Co. Ltd. can supply quality chemicals. You can also order graphiteboride.
High-quality, high-quality merchandise is what you want
tungsten disulfide powder
You are invited to ask questions. (
brad@ihpa.net
)
Tungsten Sulfide Properties
|
Titles
|
tungsten sulfide (WS2), tungsten disulphide,
tungsten(IV) sulfide, WS2 powder
|
|
12138-09-9
|
Combined Formula
|
WS2
|
Mobility
|
247.97
|
Appearance
|
Black powder or gray powder
|
Melting Point
|
1250 degC
|
Boiling Point
|
N/A
|
Density
|
7.5 g/cm3
|
Solubility
|
N/A
|
You
|
247.895074
|
|
|
|
|
Tungsten Sulfide Health & Safety Information
|
|
Alert
|
Hazard Statements
|
H315-H319-H335
|
Hazard Codes
|
Xi
|
Risk Codes
|
36/37/38
|
Privacy Statement
|
26-37/39
|
Transport Information
|
N/A
|
Inquiry us