Which is the best way to backfill a bathroom

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The backfilling of the bathroom is a crucial part of any renovation. Backfilling is an essential part of bathroom renovations. It is used to stop leaks, protect the pipe, and improve the thermal insulation. In selecting bathroom materials, you should consider a number of factors depending on your specific situation. For example, take into account the performance and cost of backfill material as well the environmental impact.

There are five types of backfills available on the market: common slags, carbon-slags backfills (also known as slags with carbon), ceramics backfills (also known as backfills for overheads), and foam cements backfills. Backfills are confusing.

Backfilling with slag can be cheaper, but because it is heavy and can cause the slab to crack easily, this could lead to leaks.

It is cheaper to use overhead backfill because you don't need as much material.

Since a few decades, foamed concrete has been popular for filling bathroom backs. But does foamed cemented have its downsides?

For your information, here are five bathroom backfill materials with their advantages and disadvantages and some selection advice:

Building debris backfill

Advantages:

The advantages of slag backfill are its lower cost, ease of construction and certain thermal insulation properties.

Disadvantages:

Backfilling with construction waste will damage the waterproofing or pipeline due to its sharp edges. Construction waste is also relatively heavy and easily settled.

Recommendation:

Has been eliminated. This is not a method that should be used. It will cost too much for a family to backfill with construction debris. To protect the waterproofing of the ground, first use fine sand, then red brick to shield the pipeline. The backfill should be compacted in layers. Finally, mud-mortar to level the surface will provide good secondary drainage.

Carbon Dregs Backfill

Advantages:

Carbon slag as a backfill has many advantages, including its low cost, ease of construction, lightweight structure, good moisture absorption, and excellent moisture control.

Disadvantages:

The disadvantages of carbon dregs are that they are not stable, easily deformed and easy to fall, as well as being relatively flimsy. They also absorb moisture in the air, which increases the pressure in the slab.

Recommendation:

In recent years, carbon slag has rarely been chosen as a backfill in bathrooms due to its negatives.

Ceramic Backfill

Advantages:

Ceramic backfill has a number of advantages including high strength, good insulation and corrosion resistance.

Disadvantages:

Before pouring in the ceramic, use lightweight bricks for layered partition. Divide the bathroom into several squares. Fill the squares with the ceramic, then place a reinforcing mesh with a diameter around one centimetre. Finally, level with cement mortar.

Suggestion: Look at your family's budget and take it into consideration.

Overhead Backfill

Advantages:

Backfilling with overhead backfill has many advantages, including its simplicity, stability, inability to deform and easy fall-off.

Disadvantages:

The labour costs are higher for backfilling than other methods. The bottom drain is located overhead and will make the sound of water more noticeable.

It is important to carefully consider whether the disadvantages of the situation outweigh any advantages.

Foamed Cement Backfill

Advantages:

Foamed cement is an increasingly popular backfill. It is also safe and eco-friendly. The raw material for cement foaming agents, plant-based fat acid, is both safe and environmentally friendly.

Benefits include good heat conservation, light weight, high strength and corrosion resistance. The backfilling process is greatly accelerated and reduced in cost, as it can be filled seamlessly and with very little effort.

Foamed cement can be mixed with cement and used to fix the pipe. If not, the pipe will easily float.

Disadvantages:

It is best to find a builder that has worked with foam cement or look up construction tutorials.

Suggestion:

The majority of people backfill their bathrooms with foamed-cement. Its advantages are still quite obvious.

The five types of backfill for bathrooms all have advantages and disadvantages. In order to choose the best material for your bathroom backfill, you should consider a number of factors. You must always consider the environment when choosing bathroom backfill materials to ensure the decor of the bathroom is safe and sustainable.

Inquiry us